- ページ 10

カメラフラッシュ Contax TLA30のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Contax TLA30 11 ページ。 Modern classic slr series

When using a Contax with direct TTL auto flash metering system, the light from the multiple flash units are metered and controlled

for correct exposure by the camera's sensor system after the light has passed through the lens. Multiple flash can be effectively

used in the following situations.

a) In cases where a single flash would produce dominant shadows, multiple flash can be used to provide supplementary lighting to

fill in or relieve the shadow area. 2) When a flash unit is placed directly to one side of subject to produce a three dimensional effect,

a supplementary flash can be employed to help lighten the shadow area that would otherwise be too dominant, thus enabling you

to attain a balanced lighting effect. c) For portraits in a room with expansive background depth, where the flash unit is incapable of

reaching the background, a single or multiple flash directed at the background will help lighten it.

While there are various other flash techniques available, in any instance, it will be necessary to take into account the best possible

position for effectively illuminating your subject.

The technique generally applied is one of using balanced lighting by varying the flash-to-subject distance of each flash unit.

Techniques available for using flash as supplementary lighting are bounce flash, diffused flash, reduced output flash in the manual

mode, etc.

When taking multiple flash in the Auto flash modes, avoid using extension cords with a combined length exceeding 10 meters. Always be sure to check that the

Flash-Ready Lamps of all units are lit.

When more than three flash units are hooked up for multiple flash, excessive flash exposure may occur.

***

Normal Auto flash mode is not suitable for multiple flash because of difficulty involved in determining the correct light factor.

TLA Flash

System Accessories

TLA

Extension Cord 100

This extension cord, measuring 1 meter overall, is used in taking off camera flash with the TLA20 and

TLA30. The shoe unit for accepting the flash unit base is provided with a tripod socket underneath.

TLA

Extension Connector S

100SS or 300SS, is mainly used for multiple flash applications. The shoe unit which accepts the flash unit base is provided with a

tripod socket underneath.

TLA

Attachment Adapter

This adapter is used when securing the TLA30 to a tripod when making multiple flash shots.

While the position and angle of

flash units for multiple flash are

influenced by the prevailing

picture-taking situation or your

photographic intent, factors

basically essential to good

lighting effects are based on

considerations for lighting

balance in which you have made

clear distinctions between the

functions of main and secondary

sources of flash illumination.

TLA

Extension Cords 100SS and 300SS

making multiple flash shots by connecting to the TLA30, RTF 540 TLA Adapter, TLA

Multi Connector S, and Extension Connector S. The 100SS is a spiral cord type,

measuring 1 meter long-, the 300SS, a straight cord type, measuring 3 meters long.

The TLA Extension Connector S, being a connector for linking the TLA20 with Extension Cord

TLA

Extension Cord 100S

Extension Cord 100S, designed for

use with the TLA20 and TLA30, is

used in taking off-camera flash shots

and in connecting to the TLA Multi

Connector S for multiple flash shots.

The 100SS and 300SS are used in

TLA

Multi Connector S

designed for use with TLA20 and TLA30 in

taking multiple flash shots, handling a maximum

of three flash units. Depending upon the

prevailing picture-taking situation or your

photographic intent, you can connect it to

Extension Cord 100S, 100SS and 300SS for

various multiple flash applications.

The TLA

This unit is specially