ページを印刷する
DM-1000 / DM-2000
Description of the device
DM-series is a family of powerful amplifiers, which guarantee high output level. There are 2 available
versions: DM-1000 and DM-2000. It is possible to use the amplifiers in one of the 3 available modes: stereo,
parallel and bridge.
Features
DM-1000 (D4212)
•
Power supply: 240V AC, 50/60Hz
Power consumption: 35W
•
Stereo mode: 2x 500W @ 4 Ohm (RMS)
•
(Both Channels Drive): 2x 300W @ 8 Ohm (RMS)
•
Bridge mode: 1x 1000W @ 8 Ohm (RMS)
•
•
Input sensitivity: 0,9 – 1,1V
Input impedance: 20kΩ balanced or 10kΩ unbalanced
•
Frequency response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05%
•
Damping factor at 8 Ohm: > 180
•
Slew rate: > 40 V/µS
•
Input CMRR: > 60 dB
•
Crosstalk 20 - 20,000 Hz: > 70 dB
•
Signal to Noise Ratio: > 96 dB A-weighted
•
Power circuitry: PFC-Switching Power Amp CLASS-D
•
Protections: Short circuit, open circuit, thermal, ultrasonic and RF protection
•
Input connectors: RCA and XLR Combo
•
Output connectors: 2x Speakon + binding posts
•
Dimensions:
483 x 410 x 89 mm (LxWxH)
•
19" x 2HE
Weight: 6,5 kg
•
DM-2000 (D4213)
Power supply: 110-240V AC, 50/60Hz
•
Power consumption: 55W
•
Stereo mode: 2x 1000W @ 4 Ohm (RMS)
•
(Both Channels Drive): 2x 500W @ 8 Ohm (RMS)
•
•
Bridge mode: 1x 1900W @ 8 Ohm (RMS)
Input sensitivity: 0,9 – 1,1V
•
Input impedance: 20kΩ balanced or 10kΩ unbalanced
•
Frequency response: 20 - 45,000 Hz, -1 dB THD+N: < 0.05%
•
Damping factor at 8 Ohm: > 180
•
•
Slew rate: > 40 V/µS
Input CMRR: > 60 dB
•
Crosstalk 20 - 20,000 Hz: > 70 dB
•
•
Signal to Noise Ratio: > 99 dB A-weighted
Power circuitry: PFC-Switching Power Amp CLASS-D
•
Protections: Short circuit, open circuit, thermal, ultrasonic and RF protection
•
Input connectors: RCA and XLR Combo
•
Output connectors: 2 x Speakon + binding posts
•
Dimensions:
483 x 410 x 89 mm (LxWxH)
•
19" x 2HE
Weight: 8,3 kg
•
Ordercode: D4212 / D4213
5