- ページ 9

アンプ DAPAudio PA-16120のPDF マニュアルをオンラインで閲覧またはダウンロードできます。DAPAudio PA-16120 20 ページ。 Public address amplifier
DAPAudio PA-16120 にも：マニュアル (12 ページ)

PA-7120

Backside

Cooling fan

Do not obstruct the air inlet.

IEC power connector 230V AC + fuse T4AL/250V

Connect the device to the appropriate power supply.

AC selector

Before connecting your PA-7120 to the mains, make sure that the AC selector is set to the proper

voltage which is used in your country. In case of doubt, consult a technician.

Loop through RCA IN/OUT

Loop through input and output connections allow external sound processing equipment to be

connected between the preamplifier and the power amplifier stages.

Media player – RCA IN

Connect an external media player to the amplifier. The source selector (09) must be set to Media

player.

Tuner – RCA IN

Connect an external tuner to the amplifier. The source selector (09) must be set to Tuner.

Aux – RCA IN

Connect an auxiliary signal source. The source selector (09) must be set to Aux.

Mic 3 function DIP switches

Moving the DIP

switches to ON/OFF allows you to set up combo input 3. The available options are:

Speech/Music

•

Phantom

•

Line/Mic

•

Speech/Music: If set to ON, the device will cut off the lower frequencies of the input signal, which will

improve speech audibility. If set to OFF, the low frequencies will not be cut off.

Phantom power: If set to ON, the device will provide power to condenser microphones.

Line/Mic: If set to ON, the input sensitivity will be set for line inputs. If set to OFF, the input sensitivity will

be set for microphone level.

Ordercode: D6151

Fig. 04