- ページ 8

アンプ DAPAudio Vision 2400のPDF マニュアルをオンラインで閲覧またはダウンロードできます。DAPAudio Vision 2400 18 ページ。 Vision mkii series high power stereo amplifier
DAPAudio Vision 2400 にも：製品マニュアル (16 ページ)

ページを印刷する

7. Power Switch

Use this switch to switch your power amplifier on.

8. "PROTECTION" Indicator

When this indicator lights, the power amplifier is in protection mode. Switch off the device and find

out what the problem is. The power amplifier is protected against overheat, overload, short circuit,

DC, soft-start.

9. Channel 2 Volume Control

In stereo mode, this potentiometer allows the adjustment of the channel 2 input level. (Right channel)

In bridge mode, this potentiometer is disabled.

10. Handles

Handles are used for easy transportation.

Backpanel:

11. Channel 1 XLR Input

This XLR input is a balanced input. Connect this input to the left output of your mixer.

12. Channel 1 Link Socket

This balanced socket is used to link another amplifier.

13. Input Sensitivity Selector

This selector allows you, to select the input sensitivity: 0.775V, 1.0V or 1.4V.

14. Bridge LED

This LED lights if the amplifier is in bridge mode.

Fig.2