- ページ 11

アンプ DAPAudio Xtreme X-2400のPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。DAPAudio Xtreme X-2400 15 ページ。 Amplifier with digital audio processor

ページを印刷する
DAPAudio Xtreme X-2400 製品マニュアル

2. PARAMETER ADJUSTMENT

In the main interface click the relative button to adjust the Gain, PEQ, Xover, Delay , Phase and Limiter Gain.
1) Gain
Click Gain button to set the level of the Left / Right Channel. Volume Range:-60dB to 6dB.
2) PEQ
Click "PEQ" button and then the frequency, gain, Q value and flat (on/off) of 5 band PEQ can be set.
Frequency range: 19.7Hz~20.2kHz
Q value: 0.4-128
3) Xover
Click the Xover Button and then the parameters of the filter (slope and frequency of HPF/LPF) can be set.
The minimum Frequency of LPF is not lower than the maximum frequency of HPF.
4) Delay
Click the Delay button and then the delay unit and the delay time can be set. Max delay: 8ms
5) Phase
Click the 180º check box to select the reverse phase 0º, 180º
6) Limiter
Click the limiter button and then the threshold, hold time, attack time and release time can be adjusted.
This is used for protecting the
system.
Fig. 4
9