- ページ 11

音楽ミキサー DAPAudio IMIX 5.3のPDF マニュアルをオンラインで閲覧またはダウンロードできます。DAPAudio IMIX 5.3 16 ページ。

ページを印刷する
DAPAudio IMIX 5.3 マニュアル
IMIX 5.3
30.
Power adapter connector
This is the remote AC power supply input socket for the IMIX-5.3 It is a special three core socket. Please
use the supplied DAP audio adapter only.
31. Zone C XLR balanced out connectors
Use these outputs to connect an amplifier with balanced inputs.
32. Zone B XLR balanced out connectors
Use these outputs to connect an amplifier with balanced inputs.
33. Zone A XLR balanced out connectors
Use these outputs to connect an amplifier with balanced inputs.
34. Zone C RCA unbalanced out connectors
Use these outputs to connect an amplifier with unbalanced inputs.
35. Zone A RCA unbalanced out connectors
Use these outputs to connect an amplifier with unbalanced inputs.
36. Zone B RCA unbalanced out connectors
Use these outputs to connect an amplifier with unbalanced inputs.
37. Channel 4 RCA line input connectors
Use to connect a line level device. You can select one of the two line inputs with the corresponding input
selection (11) switch on the frontpanel.
38. Channel 3 RCA line input connectors
Use to connect a line level device. You can select one of two the Line inputs with the corresponding
input selection (11) switch on the frontpanel. Use the phono input to connect a turntable
39. Channel 2 RCA line/phono input connectors
Use the line input to connect a line level device. Use the phono input to connect a turntable.
40. Channel 1 RCA line/phono input connectors
Use the line input to connect a line level device. Use the phono input to connect a turntable.
41. GND screw
Use to connect the ground wire of your turntable.
Ordercode: D2352
10