- ページ 12

音楽ミキサー DAPAudio PlatinumのPDF マニュアルをオンラインで閲覧またはダウンロードできます。DAPAudio Platinum 17 ページ。

23 / 25. Cross Fader Assign Switch

Switch (23) is used to assign channel 2, 3 or 4 to the A side of the crossfader.

Switch (25) is used to assign channel 2, 3 or 4 to the B side of the crossfader.

Setting one of the switches (23 or 25) to 0, will disable the according side of the crossfader,

24. Crossfader

This fader is used to blend the output signals of channels A and B together. When the fader is in the full left

position (channel A), the output signal of channel A will be controlled by the master volume level.

The same fundamentals will apply to channel B; Sliding the fader from one position to another will vary the

output signals of channels A and B respectively. When the crossfader is set in the center position, the output

signals of both the channels A and channels B will be even.