- ページ 15

マイク DAPAudio EDGE EHM-1のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。DAPAudio EDGE EHM-1 20 ページ。

DAPAudio EDGE EHM-1 ユーザーマニュアル
EDGE EHM-1

RF Output Power

In this menu you can set the RF output power.
Press the UP/DOWN buttons (10/05) to select RF POWER:
Press the SET button (09) to edit.
Press the UP/DOWN buttons (10/05) to select one of the 3 options:
LOW (10 mW)
MID (20 mW)
HIGH (30 mW)
Press the SET button (09) to confirm.
Note:
The maximum allowed RF output power differs per country and region. Consult the respective national
and/or regional authority as licensing or specific restrictions may apply for the use of the device. We do
not take any responsibility in case the device cannot operate or cannot be used in your country/region
or if it requires additional licensing. Before using the device, check the maximum allowed RF output
power in your country or region.

Lock

In this menu you can lock the display of the transmitter.
Press the UP/DOWN buttons (10/05) to select LOCK.
Press the SET button (09) to edit.
Press the UP/DOWN buttons (10/05) to select one of the 2 options:
ON: The display is locked
OFF: The display is unlocked
Press the SET button (09) to confirm.
Note:
To unlock the display, press and hold down the SET button (09) for 3 seconds, until the transmitter lock (D)
disappears from the display.
Product code: D1477B
14