- ページ 8

マルチメーター Duratool D03046のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Duratool D03046 10 ページ。
Duratool D03046 にも：取扱説明書 (8 ページ)

2. Set RANGE switch to desired DCA position.

3. Open the circuit to be measured, and connect

test leads IN SERIES with the load in

with current is to measure.

4. Read current value on Digital Display.

5. Additionally, "5A" function is designed for

intermittent use only. Maximum contact time of

the test leads with the circuit is 10 seconds,

with a minimum intermission time of 15

minutes between tests.

RESISTANCE MEASUREMENT

1. Connect red lead to "VΩmA". Connect black

lead to "COM".

2. Set RANGE switch to desired Ω position.

3. If the resistance being measured is connec-

ted to a circuit, turn off power and discharge all

capacitors before measurement.

4. Connect test leads to circuit being measured.

5. Read resistance value on Digital Display.

1. Connect red lead to "VΩmA". Connect black

lead to "COM".

2. Set RANGE switch to "

3. Connect the red test lead to the anode of the

diode to be measured and black test lead to

cathode.

4. The forward voltage drop in mV will be

displayed. If the diode is reversed, figure "1"

will be shown.

" position.

- 8 -