- ページ 4

ドリル Duratool D01965のPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。Duratool D01965 12 ページ。 18v li-ion cordless drill driver

Safety precautions

When using electrical machinery always follow local safety precautions regarding

risk of ﬁre, electric shock and injury. In addition to the instructions below, please

read the safety precautions in the separate safety folder.

1. Remove the battery.

When the electric tool is not in use, is undergoing maintenance or when a device

such as a chuck or drill bit is to be replaced.

2. Check the tool for any damage.

Before using the tool again, e.g. after charging the battery, check all parts

carefully for correct and problem-free functioning. Check that the moving parts

are functioning problem-free and not jamming, and also check for any damage to

All parts must be correctly ﬁtted and fulﬁl all requirements with regard to

problem-free functioning of the electric tool. Any damaged parts must be repaired

or replaced correctly by a qualiﬁed professional, unless otherwise stated in

the instruction manual. If the power switch is damaged, it must be replaced by an

authorised workshop. If the switch will not turn on and o , the tool must not be used.

Important safety instructions for

charging unit and battery

If you come into contact with battery acid, wash it o immediately with water. In case

of contact with the eyes, rinse with water and seek immediate medical advice.

1. The operating instructions and safety instructions for the charging unit and

battery must be read and complied with before use.

2. Note: Only use the charging unit and battery supplied by the manufacturer,

as otherwise there is a risk of accidents.

3. The charging unit, battery and electric tool must be protected against damp,

such as rain and snow.

4. Before using the charging unit, check that all cables are correctly connected.

5. If any of the cables are damaged, the charging unit must not be used. The

damaged cable must be replaced immediately.

6. When the charging unit is not in use, you must remove the mains plug from

the socket. Do not pull on the cable to remove the plug.

7. If the charging unit falls on the ﬂoor or is subjected to any other form

of mechanical impact, it should be checked by an authorised workshop

before being used again. Any damaged parts must be repaired.

8. The battery must be handled with care. It must not be dropped or subjected to impacts.

9. You must not attempt to repair the charging unit or battery yourself.

Repairs must always be carried out by an authorised workshop, as otherwise

there is a risk of accidents.

10. Before any cleaning or maintenance of the charging unit or battery, the unit

must be unplugged from the mains.

parts.