- ページ 2
計測機器 Duratool D03121のPDF クイックマニュアルをオンラインで閲覧またはダウンロードできます。Duratool D03121 4 ページ。 Motor & phase rotation indicator
ページを印刷するIMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future
reference.
•
When using electrical appliances basic safety precautions should always be
followed.
•
Use the meter only as specified in this manual, or the protection provided may be
impaired.
•
Do not operate the indicator or use the testing line if it appears damaged, or if the
indicator is not operating properly.
•
Do not operate the indicator with missing or an incorrectly installed battery back
cover.
•
There are no user-serviceable parts in this product. Refer servicing to qualified
personnel.
•
Do not use the indicator around explosive gas or vapour.
•
Do not connect the instrument to a power supply with a voltage exceeding the test
working voltage.
•
Do not use the instrument in a thunderstorm or damp conditions.
•
Replace the batteries as soon as the low battery indicator appears on the display.
•
Fit a full set of batteries at one time.
•
Remove dead batteries from the appliance or if it is not going to be used for a long
time.
•
Never mix old and new batteries together, or different types of batteries.
•
Never dispose of batteries in a fire, or attempt to recharge ordinary batteries.
OVERVIEW
1
2
3
4
5
6
7
OPERATION
Contact type phase sequence test:
•
Connect one end of the test lead to the indicator (connect L1, L2 and L3 test leads
to the corresponding input jack) and another end to the alligator clip.
•
When the three-phase line is tested, it will clamp the end of the test line with the
alligator clip to the three phase lines in the three-phase system (e.g. U, V and W
1. Input jack
2. Phase line indicator light
10
3. Counter-clockwise indicator light
4. Power light
9
5. Test button
6. Description of indicator light
7. Left sensor position
8. Right sensor position
8
9. Clockwise indicator light
10. Direction indication symbol