- ページ 2
リワーク・ステーション Duratool D03167のPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Duratool D03167 2 ページ。 Hot air smd rework station
ページを印刷する•
In long press, the set-point will change quickly and reach
your target temperature.
•
" * " is the transfer button between °C and °F.
Note: The default unit is °C.
•
When you put the air pump on the bracket, the item will
stop heating and the display will show "SLP", meaning
"sleep".
•
When you pick up the air pump once again the item will
return to the set temperature.
Usage
•
Connect the mains plug to a socket.
•
Assemble the nozzles into position. Note: Try to use nozzles with a larger
diameter.
•
Turn on the power switch, set the air flow rate and temperature and put the unit on
the racket.
•
Put the nozzle on the pins of the IC, so that the hot air can melt the solder tin on
the IC pin, then use the tweezers to remove the IC.
•
After use, turn off the power switch, remove the plug from the power supply and
allow to cool before storing in a safe place out of the reach of children.
QFP Soldering
•
Apply the right quantity of solder paste and install the
SMD on the PWB.
•
Preheat the SMD (Fig.1).
•
Solder by heating the lead frame evenly (Fig.2).
Washing
•
Once soldering is complete, wash away the flux.
•
Note: The machine may cause defects such as solder balls or solder bridges, so
be sure to examine the soldering.
SPECIFICATIONS
Rated power input
Rated voltage range
Hot air temperature
Display
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste
Electrical & Electronic Equipment (WEEE). Any WEEE marked products
must not be mixed with general household waste, but kept separate for the
treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
300W
220-240V AC, 50Hz / 110-130V, 60Hz
100-500°C
LED segment displays
Fig.1
Fig.2
Made in China. PR2 9PP
V.1.0