- ページ 3

屋外用家具 DuraTrel 11126のPDF 組立・取扱説明書をオンラインで閲覧またはダウンロードできます。DuraTrel 11126 7 ページ。 6' picnic table with benches

Lay out four 72" table top rails (part 1) and one center table rail (part 2) as shown above with pilot holes

facing up, leaving ⅛" gap between rails. Set four 12 ¾"" table brackets (part 3) over pilot holes at each

end of table top rail, making sure brackets are offset as shown. Using ¾" screws, fasten each bracket to

table top rails.

Apply glue to inner edges of ⅞ x 1½" end cap (from hardware bag) and press on each end of 27" cross

brace (part 5). Set center brace over pilot holes in center of table top. Using 1½" screws, fasten cross

brace to table top.

Apply glue to inside edges of 28" table top end cap (part 9). Press end cap onto ends of table top (DO

NOT slide from end). Take care that end cap is flush with ends of table and use a file to round off any

sharp edges.

6' Picnic Table with Benches - Page 3