- ページ 5
室内装飾品 DuraTrel 11116のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。DuraTrel 11116 6 ページ。 8' picnic table
ページを印刷するCROSS BRACE / LEG ASSEMBLY
Lay out two 30¼" legs (part 5) on an angle with pre-drilled holes for attaching table top, nearest each other at
top. Lay one 59½" cross brace (part 4) across legs; adjusting legs so bolt holes line up. (Due to wood inserts in
legs drying out, it may be necessary to ream holes out using a ¼" drill bit)
Using four 3½" botls, eight washers and four nuts, fasten cross brace to legs. (Do not over tighten as this will
crush the vinyl) Bolt heads will face outside of the table.
Apply glue to inside edges of 5½" cross brace end cap (part 13). Press end cap onto ends of cross brace (DO
NOT slide from end). Take care that end cap is flush with ends and use a file to round off any sharp edges.
Apply glue to inside edges of 6⅛" seat end cap (part 12). Press end cap onto ends of seat (DO NOT slide from
end).
8' Picnic Table
5