- ページ 5

医療機器 DARAY X100LEDのPDF マニュアルをオンラインで閲覧またはダウンロードできます。DARAY X100LED 10 ページ。 Led examination light

3. WALL MOUNTING

 Remove the light from its packaging.

 Mark on the wall the selected location for the wall-mounting bracket, bearing in mind the final

position of the light-head.

 Screw the bracket to the wall.

 Fit the spigot on the end of the light arm into the wall bracket.

 Please note screw fittings are not included

 Tighten the locking screw to lock the light into the bracket whilst still allowing it to turn.

 Plug the power supply module into a mains socket.

 Turn the light on using the press switch at the rear of the light-head and adjust the light-patch to

where it is required.

Unplug the power supply when the light is not going to be used for extended periods.

 Remove the light from its packaging.

 Slacken the desk clamp so that its jaws just clear the desk edge.

 Tighten the clamp sufficiently to provide a rigid mounting for the light.

 Fit the spigot on the end of the light arm into the top of the clamp and tighten the locking screw

to lock the light into the clamp whilst still allowing it to turn.

 Plug the flex from the power-supply module into the socket at the end of the light arm, and plug

the module into a mains socket.

 Turn the light on using the switch at the rear of the light-head and adjust the light-patch to

where it is required.

Unplug the power supply when the light is not going to be used for extended periods.

PIVOTW

PIVOTW2