- ページ 6
シェルター Duratuf KIWI SHEDS MK4AのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Duratuf KIWI SHEDS MK4A 16 ページ。 Base size 4.210mm x 2545mm
ページを印刷する
TO AVIOD CORROSION:
•
Where at all possible try not to trap metal filings between two sheets. Remove all metal filings before riveting.
•
Carbon in pencils reacts with the Zinc/Aluminium coating on steel. Use ink to mark steel.
TERMS EXPLANATION
•
To Tack: To Tack on a wall sheet means to use minimum nails hammered partly in to hold Wall Sheets in position. Should a Wall
Sheet need to be re-positioned, the nails can easily be prized out.
•
If a window is required, identify Wall Sheet(s) with window hole pre-cut. Lean up Wall Sheets where window(s) are to be located.
MK4A WALL CLADDING
CLADDING DETAIL
Birds Eye View
fig. 1
6
Note:
When fitting Gable
End Sheets en-
sure they overlap
correctly (fig 1).
The overlap direc-
tion may differ
from cladding de-
tail.