- ページ 6

ストレージ Duratuf KIWI MK4CのPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Duratuf KIWI MK4C 18 ページ。 Shed

Step 4: Stand up Back Wall frame and one End frame

and nail together, using two 75mm nails per join,

top and bottom. Stand remaining Frames up and

nail together. Nail in remaining 0.778m Nogs in

End Walls.

Step 5: Position middle Jack Stud, centrally on End Wall

Top Plates and nail in place. Nail remaining Jack

Studs in. Position middle Ridge Beam to Jack

Stud and skew-nail in place using two 75mm

nails each end. Pre-drilling holes before nailing

will prevent timber from splitting.

Step 6: Place intermediate Roof Beams by using Roofing

Nogs to determine correct position (see fig. 2).

Nail intermediate Roof Beams in place. Nail

70x45mm Roofing Nogs in place (End Wall).

Step 7: Place Frame in correct position, checking the shed

is square and level. Dynabolt Frame to concrete

base as instructed on page 4.

Step 8: Nail multigrip brackets to each of the four bottom

corners (two per corner). Use 30mm Clouts supplied.

MK4C TIMBER FRAME

fig.2.

953mm

882mm