- ページ 4

計測機器 Contech CDP-001のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Contech CDP-001 8 ページ。 Digital polarimeter

OPERATIONS

Polarimeter should be placed on a stable, vibration free surface in a dry & clean room with

good ventilation & temperature around 20 .

Power supply to the instrument is 230V and should be sourced through voltage stabilizer 1KVA

with a proper earthing.

Turn on the power supply switch (Allow sufficient warm up time ‐ 20 min. after and before

testing to use the instruments.)

0~9 : Numeric keys for entry of all parameters

AUTO : For Automatic measurement of parameters (measurement for the number of times

automatically as per parameter N.

MANUAL : For manual measurement of the parameter

SET UP / ◄ : Setting the parameters, Stopping the test, Back entry of parameters.

ENTER : Forwarding of parameters in the entry mode, starting of test.

CLEAR : Clearing the screen.

ZERO : Zeroing the reading.

MODE : There are 4 modes of measurement corresponding to different measuring units.

MODE 1 : Optical Rotation

MODE 2 : Specific Rotation

MODE 3 : Concentration

MODE 4: International Sugar Scale

L is the length of sample tube in decimeter. There are 2 sizes of tubes available L = 1 dm(10 cm)

& L = 2 dm(20 cm)

C is concentration of solution in gms/100ml.

N is number of measurements.

SET : For setting parameters by pressing ENTER key with display SET highlighted.

OK : OK of parameters when ENTER Key is pressed with OK highlighted