- ページ 6

照明器具 DARAY X350LEDのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DARAY X350LED 17 ページ。 Mobile medical examination light

3. OPERATION

Position the light by moving it using the handle provided on the main stand.

The front castors on the base have brakes which can be used to help keep the base from

moving whilst the light-head position is adjusted.

Unwrap the flex from the cable holders

Plug the IEC connector into the base ensuring the metal safety retainer is fitted over the top

of the IEC plug connector.

Once connected to the mains, switch the illuminated power switch ON and the green

indicator will be illuminated. If the indicator does not illuminate, check the power supply

and then check the fuses located in the IEC socket on the mobile base (see section 5. FUSE

REPLACEMENT) and also in the mains plug. Further fault investigation should only be carried

out by a qualified electrician.

Turning the light ON/OFF and adjusting the intensity

There is a rocker switch on the light-head near the handle.

This is a momentary type switch and does not latch.

• Press the switch once to turn the light ON

• Press and hold to decrease intensity

• Press and hold to increase intensity

• Press the switch once again to turn the light OFF

Note: If mains power is removed by either unplugging or

turning off at the base, the intensity will be reset to its

brightest setting when the light is powered on again.

The light-head can be rotated on the flexible arm which

itself can be bent almost double so the light patch may be

directed at will.

Illuminated

power switch

IEC mains

connector

Rocker

switch

Safety

retainer

Light-head

handle