ページを印刷する
I N S T R U C T I O N
Step 3
Before attempting to insert the aluminium pole into the second pin, ensure the pole sleeve is centred on the pole.
Place you palm under the pole end, and push upward until there is a gap between the pole end and the second pin.
Insert the second pin.
IMPORTANT: DO NOT BEND THE POLE TO INSERT THE SECOND PIN.
Repeat this process for the other pole whilst correcting the swag skin as you assemble.
Step 4
Clip the swag to the aluminium poles. A good technique for attaching the clips is to alternate from one side to the
other - top left, then top right, second left and then second right and so on.
4
M A N U A L
1
2
3
4
5
7
Step 5
Stretch out the base of the swag to ease assembly when placing the trigger pole. Insert the trigger spreader pole
into one of the centre eyelets.
Step 6
Release the trigger to extend the pole and insert into the eyelet at the other end. Tension the bar to stretch the swag
into shape then lock into position.
Peg out and tension the guy ropes if required. Your Dusk to Dawn swag set up is now complete.
6
8
D A R C H E . C O M . A U