- ページ 7

扇風機 DuraVent DirectVent ProのPDF 取付説明書をオンラインで閲覧またはダウンロードできます。DuraVent DirectVent Pro 8 ページ。 Chimney liner system for use with direct vent gas appliances
DuraVent DirectVent Pro にも：取付説明書 (12 ページ)

ページを印刷する

FLEX LINER

FLEX

COUPLING

Flex Liners to the Appliance Connector using

four sheet metal screws each. (Figure 9) In

either case, make sure the Flex Liners do not

sag behind the appliance. Finally, move the

appliance into its appropriate place.

GENERAL MAINTENANCE

Conduct an inspection of the venting system

semiannually. Recommended areas to inspect are

as follows:

1. Check areas of the Venting System which are

exposed to the elements for corrosion. These

will appear as rust spots or streaks, and in

extreme cases, holes. These components should

immediately be replaced.

2. Remove the cap and remove any bird nests, or

other foreign material.

3. Check for evidences of excessive condensate,

such as water droplets forming in the liners, and

subsequently dripping out at joints. Continuous

condensate can cause corrosion of caps, liners, and

fittings. It may be caused by having exterior portions

of the system being exposed to cold weather.

CO-LINEAR CONNECTORS

SHEET METAL

SCREWS

Figure 6

FLEX LINERS

SHEET METAL SCREWS

STANDARD TERMINATION CAP

CO-AXIAL TO CO-LINEAR

CONNECTOR

Figure 9

CO-LINEAR TO

CO-AXIAL ADAPTER

FLEX LINERS

BASEPLATE

Figure 7

HIGH WIND

TERMINATION CAP

Figure 8

FLEX LINERS

SHEET METAL SCREWS