- ページ 2
エンクロージャー Addonics Technologies CPR5SAのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Addonics Technologies CPR5SA 2 ページ。 Compact raid
ページを印刷するReset Device / Change Mode button
Power switch / Buzzer disable button
Installation Guide
Two Options for Setting RAID on the Compact RAID Box
(only select one option)
I.
Using the JMicron HW RAID Manager utility program
For Windows users, install the JMicron HW RAID Manager located on the
SATA Controller CD. In the CD, go to RAID utilities > JMB393. This manager
can be used to create and monitor the status of the RAID volume.
Use the RESERVE DIP switch setting when using the JMicron HW RAID
Manager.
RAID Setting DIP switch
Power connector
eSATA connection
1. To open the front panel, press the
push-open button.
2. Slide the 2.5" SATA hard drive into
the slot. Push back the front panel.
II.
Using the onboard RAID DIP switch
RAID Status
1
RAID 0 (stripped)
ON
RAID 10
ON
JBOD (Large)
ON
RAID 3
ON
Clone
OFF
RAID 5
OFF
RESERVED
OFF
Normal (Individual drives)
OFF
a. Select the setting desired using the DIP switch table.
b. Using the provided eSATA to eSATA cable, connect one end to the
eSATA port on the RAID box and the other end to the eSATA controller
card.
c. Press the power switch button for more than 2 seconds. Wait for power
LED status to change from starting to ready.
d. Press the "Change mode" button for more than 2 seconds. This will
configure the raid volume.
e. Navigate to the Disk Management utility to configure the drives.
Note: for the system to detect multiple individual drives, the RAID box must be
connected to a port multiplier compatible eSATA host controller. If the RAID box
is NOT connected to a port multiplier compatible eSATA host controller, the
system will only detect one drive and that is the hard drive in slot HD0.
RAID Monitoring LED
RAID Status
RAID 10
RAID 3
RAID 5
Clone
JBOD (Large)
RAID 0
DIP Switch
2
3
ON
ON
ON
OFF
OFF
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
OFF
LED Indicator
Access
Blue / Flash
Rebuilding
Blue & Red / Flash
Access
Blue / Flash
Rebuilding
Blue & Red / Flash
Access
Blue / Flash
Rebuilding
Blue & Red / Flash
Access
Blue / Flash
Clone
Blue & Red / Flash
Access
Blue / Flash
Access
Blue / Flash