- ページ 19

サーバー Contemporary Controls AI-SRVR-8TB5のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Contemporary Controls AI-SRVR-8TB5 20 ページ。 Arcnet server to ethernet client

4.3.2 AI-PROXY Configuration

The AI-PROXY configuration screen differs from that of the AI-SRVR in that five fields

have been deleted and two fields added. The default screen is that of Figure 12. The

fields present in the AI-SRVR screen but missing from the AI-PROXY screen are:

Node ID

Receive All

Nodelist Timeout (Ethernet clients are not used with AI-PROXY)

FIFO Depth

UDP Port

The two new fields are described below:

Remote Proxy IPs — This field lists only the IP addresses (in the dotted-quad format)

of AI-PROXY units that are separated by a router. Since a router blocks broadcast

messages, such units cannot self-discover their IP addresses as is normally done within

a common subnet. This field can accept up to 256 lines including comment lines that

must begin with the pound symbol (#) and have no more than sixteen characters.

Node ID List — This field is used to enter the decimal value of each node ID being

represented by this proxy device. After each value is typed in, press the 'Enter' key. If

the proxy device is an AI-SRVR-8, up to eight values can be entered. When more than

three values are entered, this field will scroll to accommodate another value. You can

scroll this field with the up and down arrow keys.

Figure 12 — AI-PROXY Default Configuration Screen

(instead, the AI-PROXY uses the Node ID List field)

(promiscuous mode is not used in the AI-PROXY)

(mailboxes are not used with AI-PROXY)

(UDP protocol is not used with AI-PROXY)

TD000200-0MB