- ページ 5

メディア・コンバーター Contemporary Research QIP-SDI 2のPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Contemporary Research QIP-SDI 2 14 ページ。 Qip iptv encoders

ページを印刷する

Installation Overview

First Things

Always start by defining video and audio inputs by selecting the QUICK menu. Press SETUP, move left or right and press

SELECT. Use Up - Down and Right – Left, then SELECT to save your choices. You can test streams offline via a PC and VLC

software (see page 15).

Inputs

Just a few things to know:

•

HDMI – the input can't pass encrypted HDCP content, accepts up to 1080p (output as 1080p with Auto

Resolution on) and can work with 60/30 Hz, VGA standard, and PAL video. For more information, view our

Support Blog on

•

SDI – Accepts up to 1080p video, as well as 30/60 and PAL refresh rates. Captioning can be embedded or from

the CC port, audio is embedded or from a separate audio input

•

Video – Accepts NTSC or PAL video, check the previous page for rules

•

None – Choose None for the Program B, to make the encoder a single-program unit

PC and Other Source Scaling

In general, PC video via HDMI 1080p will be very close edge-to-edge, as the data from HDMI provides the information

needed to exactly scale the image. Some TVs vary in how they present the scaled image, the best for LG will be the Just

Scan mode, Normal for Visio, or similar for other brands. In Auto Resolution mode, 1080p will be output as 1080p.

Advanced Setup

Once you get to the more advanced options, such as setting up MPEG2/H.264, Unicast and Multicast operation– you can

still use the front-panel menus, but the Web pages will be quicker. See page 9 to learn how to use the front-panel USB

port to view the Web pages. Once you set the feature, you can plug and play with all QIP Encoders.

IPTV

There can be up to 2 SPTS (Single Program Transport Stream) streams, one from each encoder, set to MPEG4 H.264 or

MPEG2, at a fixed or variable bitrate, set for each Program. Ethernet format can be UDP or RTP. Unicast, where the

stream is pointed at one specific player, works on all networks, bandwidth permitting. Multicast will only work of all of the

site's routers and switches support Multicast IGMP operation. In the rare case that the site wants two programs in one

stream (MPTS Multiple Program Transport Stream), that option can be set in the Advanced menu.

EAS Emergency Alert Service

You can select any video and audio input as the EAS source. A latching contact closure (NO – SW and GND) or 5-24 VDC

voltage will trigger the event (GND and V+), and restore to the previous inputs when released.

Reset Options

(Just a short press on designated buttons)

•

Pressing the Left and Right arrows does a soft encoder reboot (some components like HDMI aren't reset)

•

Resetting power will reset all system components without changing settings

•

Pressing Left and Right arrows during power-up resets to custom AV settings (see Advanced menu page).

•

Pressing Up and Down during power-up clears everything, resets to factory settings – use with caution

Contemporary Research

Using HDMI

Sources.

QIP IPTV Encoders