- ページ 4

アンプ Contemporary Research ICE-HE-DXLのPDF インストレーション・マニュアルをオンラインで閲覧またはダウンロードできます。Contemporary Research ICE-HE-DXL 11 ページ。 Display control center
Contemporary Research ICE-HE-DXL にも：ユーザーマニュアル (19 ページ)

ページを印刷する

TV Controller Installation

The TV Controllers received with the Venue Vizion system are pre-addressed as TVs 1-20. The addresses match the TVs pre-defined in the DX

Lite web page. Up to 128 TVs can be defined in a Venue Vizion system using DX Lite. Before installing the controllers, document which TV the

controller will be connected to and its location. This will help identify the TVs when you customize the DX Lite database.

In the form below, the Address is the network address for each controller. In DX Lite, the address is the TV number, plus 256. Columns to the

right of the address refer to the first of two DIP switches on the back of each controller. While the controllers are pre-set, you will need to

understand how to set the switches if you add more controllers. You can also download the

documentation.

The switches on the left, S1, set the TV number, and the switches on the right, S2, set the Zone. The Up wswitch position is "On" and the

Down position is "Off". This corresponds to the 1 (On) and 0 (Off) values in the spreadsheet. For the Venue Vizion system, all TVs need to be

set to Zone 1, 256. Dip switches 2-8 are used for other applications.

Example:

To set TV 3 in the spreadsheet

•

S1 - Flip dip switches 1 and 2 up (On). Dip switches 3-8 remain down (Off).

•

S2 - Flip dip switch 1 up (On), numbers 2-4 remain down (Off) to set the controller to Zone 1.

•

This sets TV3 to address 259 (adding 3 on the first set of switches to 256 on the second set).

Page 4

Venue Vizion Worksheet spreadsheet

TV Controller DIP Switches On the back of the ICC1-232 or

ICC1-IRX TV controllers, you will see two sets of switches

side-by-side. Turn the controller so that they are at the

bottom.

to simplify