- ページ 4

アンプ Contemporary Research QCA9-33のPDF 製品マニュアルをオンラインで閲覧またはダウンロードできます。Contemporary Research QCA9-33 4 ページ。 Rf amp/combiner
Contemporary Research QCA9-33 にも：インストレーション・マニュアル (11 ページ)

ページを印刷する

Rack Mounting

Two options are available for rack-mounting the QDA4-45 and QCA9-33; the units should not be mounted adjacent to

QMOD or QIP encoders, as there is no flow-through ventilation through the QDA4-45 and QCA9-33.

RK2EZ Dual Rack Kit with Tie Bar Mounting

Use this rack kit for mounting one unit in a half-width rack. QIP enclosures have a slot in the bottom middle of the case.

This will accept a tie bar that will lock the two enclosures together without taking the cases apart. Do not mount the

QCA9-33 or QDA4-45 units next to QIPs, as the units will block flow-through fan ventilation.

1. Check that your enclosures have the tie bar slot.

2. Slide the included tie bar into the side of one unit and attach with the included screws.

3. Slide the other unit into the tie bar, and attach the screws

4. Add the rack mounts to the sides.

Limited Warranty and Disclaimer

Warranty: Three (3) year limited warranty on all parts and labor for Contemporary Research manufactured products from

the day of purchase by authorized dealer. Manufactured products are warranted against defects in materials and

workmanship. If Contemporary Research receives notice of such defects during the warranty period, Contemporary

Research will repair or replace, at its option, products that prove to be defective.

Exclusions: The above warranty shall not apply to defects resulting from improper or inadequate maintenance by the

customer, customers applied software or interfacing, unauthorized modifications or misuse, mishandling, operation

outside the normal environmental specifications for the product, use of the incorrect, modified or extended power

supply, or improper site operation and maintenance. Please note Contemporary Research SSV-DX Display Express PC

product carries a six month limited warranty.

Contemporary Research

RK1 Single Unit Rack Mount

Attach the long and short rack ears to the side and towards

the front of the unit with the four (4) supplied 8-32 by ¼"

(black) countersunk screws

QDA4-45