- ページ 2

室内装飾品 Contender C990476-101のPDF 組立説明書をオンラインで閲覧またはダウンロードできます。Contender C990476-101 8 ページ。

Step 7: Insert remaining edges of Sides and

Back piece into grooves of Top piece. Insert

hex screws into each of the pre-drilled holes

in Top piece.

Step 9: Insert Handle Screw from back of door into

the Handle and tighten. Repeat for remaining Door.

For assistance, call: Customer Service 1-800-247-8465

C990476-101 ASSEMBLY INSTRUCTIONS

Step 5: Slide Back piece into back

grooves of Side pieces and slide

downward until Back sits in groove

of Bottom piece.

Step 6: Align holes in Backsplash with

holes in Top piece. Insert hex screws into

each of pre-drilled holes in underside of Top

piece, screwing upwards into Backsplash.

Tighten screws.

Step 8: Install Door to hinge pre-installed to Side. Use (8)

Small Screws to screw Door to hinge using pre-drilled

holes in door. Make sure handle holes are torwards center

of cabinet. Repeat for remaining door.

Step 10: Tighten all screws snugly.

DO NOT OVERTIGHTEN. DO NOT

DRILL. Assembly is now complete.