- ページ 11
コンピュータ・ハードウェア Addonics Technologies RR2035ASDESのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Addonics Technologies RR2035ASDES 13 ページ。 Raid rack
RAID Rack with Port Multiplier Compatibility
Note: The Port Multiplier will only work with a Port Multiplier aware host. Identify your
host controller and check with its hardware manufacturer if you are unsure. Addonics
offers several Port Multiplier capable host adapters.
When the port multiplier (PM) is connected to a host controller with
SiI3124 or SiI3132 chip, in the RAID BIOS of the host controller you will only see
one drive and that is the drive connected to SATA port 1 on the Port Multiplier.
All SATA drives connected to the PM will show in the SATARAID5 Array Manager.
Refer to the SATARAID5 Management Utility User Guide V1.6 for RAID
implementation
http://www.addonics.com/support/user_guides/host_controller/SATARAID5-UserGuid
e_v1.60.pdf
Power Supply
This power supply provides 500W of
power. Before turning on the main
switch located on the front panel of
the storage rack, turn on the power
switch of the power supply.
Connecting the Power Cable and RAID Rack to the
Computer
a.
Connect the power cord provided from the wall outlet to the back of the rack.
b.
Make sure the power is off (power LED light should be off).
c.
Connect the RAID Rack to the computer using the provided eSATA cables.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Fan
Phone: 408-453-6212
Power Switch
Email: www.addonics.com/support/query/