- ページ 9

アクセサリー Aplisens PCE-28.ModbusのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Aplisens PCE-28.Modbus 20 ページ。 Pressure transmitters

Transmitter can be equipped with:

 "M" process connection, thread M20x1,5;

 "P" process connection, thread M20x1,5 and 12 hole;

 "CM30x2" process connection, thread M30x2 with flush diaphragm;

 "G 1/2" process connection, thread G1/2'' and 4 hole;

 "GP" process connection, thread G1/2'' with flush diaphragm;

 "CG1" process connection, thread G1'' with flush diaphragm;

 "RM" process connection, thread M20x1,5 with 4 hole and radiator;

 "RP" process connection, thread M20x1,5 with 12 hole and radiator;

 "G 1/4" process connection, thread G1/4'' male;

 "1/2NPT" process connection, thread 1/2NPT male;

 "R 1/2" process connection, thread R ½ and 4 hole;

 "CG 1/2" process connection, thread G1/2'' with flush diaphragm;

 "9/16-18 UNF" process connection autoclave F-250 compatible;

 "1/4NPTF" process connection, thread 1/4NPT female;

 "1/2NPTF" process connection, thread 1/2NPT female;

 Other on request.

Differential pressure transmitter measuring head can be equipped with :

 P type with M20x1,5 thread process connection;

 Diaphragm seals: see Diaphragm Seals Data Sheets;

 Other on request.

SGM type electrical connection has hermetically sealed cable with poliurethane sheath

and is equipped with M20x1,5 or 1/2"NPT male thread.

FL type electrical connection has hermetically sealed wires with PVC insulation and

M20x1,5 or 1/2"NPT male thread.

Electrical connection designations:

FL (M20x1,5), FL (1/2"NPT) –2, 3 or 4 according to 9.1 0,5mm

length: 180cm

SGM (M20x1,5), SGM (1/2"NPT) – PUR (polyurethane) cable length: 350cm

Figure 3. Electrical connections of the transmitters PC(R)E-28, PC(R)E-28 Ex Safety,

PC(R)E-28.Smart, PC(R)-29A, PC(R)-29B, PC(R)E-28.Modbus

04.A.004

IO.PCE-28....PC-29.Exd

PVC insulated loose wires