- ページ 17

リフティングコラム APlusLift HW-10KBP-AのPDF インストレーション＆オペレーションマニュアルをオンラインで閲覧またはダウンロードできます。APlusLift HW-10KBP-A 20 ページ。 2-post floor plate car lift 10,000lb capacity

ページを印刷する

APlusLift HW-10KBP-A インストレーション＆オペレーションマニュアル

5. Check the cylinder pulley assembly for free movement or excessive wear on the

cylinder yoke or pulley pin.

6. Check the cable pulley for free movement and excessive wear.

Yearly Maintenance

1. Lubricate the chains

2. Grease the rub blocks and column surface contacting the rub blocks

3. Change the hydraulic fluid. It is an important maintenance procedure to keep the

hydraulic fluid clean. No hard fast rules though. Operating temperature, type of service,

contamination levels, filtration, and chemical composition of the fluid should be

considered. If operating in a dusty environment a shorter interval may be required.

Special Maintenance Tasks (performed by a trained maintenance expert only)

 Replace the hydraulic hoses.

 Replace the chains and rollers.

 Replace the cables and sheaves.

 Replace or rebuild the cylinders.

 Replace or rebuild the pumps / motors.

 Checking of hydraulic cylinder rod and rod end (threads) for deformation or damage.

CAUTION! Relocating or changing components may cause problems. Each component in the

system must be compatible. An undersized or restricted line may cause a drop in pressure. All

valve, pump, and hose connections should be sealed and/or capped prior to use. Air hoses

can be used to clean fittings and other components. However, the air supply must be filtered

and dry to prevent contamination. Most important is cleanliness. Contamination is the most

frequent cause of malfunction or failure of hydraulic equipment.