- ページ 15
配管製品 DURAVIT InipiのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。DURAVIT Inipi 19 ページ。
DURAVIT Inipi にも： プレインストール (10 ページ)
ページを印刷する
8.7 Changing the intensity of the display
> Select settings > display > intensity.
> Press the "left" or "right" button until the desired intensity is set.
> Press the "OK" button to confirm.
8.8 Changing the contrast of the display
> Select settings > display > contrast.
> Press the "left" or "right" button until the desired contrast is set.
> Press the "OK" button to confirm.
8.9 Change PIN
> Select settings > security > change PIN.
Enter the current PIN:
> Press the "up" or "down" button until the first digit of the PIN is displayed.
> Press the "right" button to select the next digit.
> Repeat those last two steps until you have entered the PIN.
> Press the "OK" button.
> Enter the new PIN as just described.
> Press the "OK" button.
> Enter the new PIN a second time for verification, as just described.
> Press the "OK" button to confirm.
8.10 Turning on the PIN-request
> Select settings > security > PIN-request > on.
Enter the 4 digit PIN:
> Press the "up" or "down" button until the first digit of the PIN is displayed.
> Press the "right" button to select the next digit.
> Repeat those last two steps until you have entered the PIN.
> Press the "OK" button.
> Enter the new PIN a second time for verification, as just described.
> Press the "OK" button.
The PIN will be requested when attempting to turn on the sauna.
28
8.11 Turning off the PIN-request
> Select settings > security > PIN-request > off.
For security reasons you must enter the PIN as follows:
> Press the "up" or "down" button until the first digit of the PIN is displayed.
> Press the "right" button to select the next digit.
> Repeat those last two steps until you have entered the PIN.
> Press the "OK" button.
The PIN will no longer be requested when attempting to turn on the sauna.
8.12 Resetting back to defaults
> Select settings > default > reset.
To ensure the settings are not reset to their defaults by accident, the security code
2412 must be entered.
> Press the "up" or "down" button until the correct digit is displayed.
> Press the "right" button to select the next digit.
> Repeat the last two steps until you have entered the complete security code.
> Press the "OK" button.
All settings are reset to their defaults.
8.13 Activating / deactivating the light ring on the charging station
> Find a thin pin or straightened paper clip that fits through the small hole in the
charging station located next to the power cable connector.
> Press this pin through the hole for three seconds.
9. Cleaning and Maintenance
Note!
The surfaces may be damaged by using the wrong cleaning agents.
Only use a cleaning agent that is recommended by Duravit.
Never use abrasive, aggressive or chemical cleaning agents.
29