- ページ 6
配管製品 AFA Stainless AF2421CSのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。AFA Stainless AF2421CS 12 ページ。 All-in-one 304 stainless steel utility sink with faucet and drain
ページを印刷する7
D-1
D-2
D-3
D-4
D-5
Prepare strainer for installation.
Loosen the Lock nut (D-5) , check to
ensure that all parts are complete.
10
A-1
A-5
Slide hot & cold water supply
lines (A-5) through mounting hole
and position faucet on sink.
8
Place the Bottom gasket (D-3) on
the underside of the Strainer bowl
(D-2). Place Top gasket (D-4) on
top of Lock nut (D-5) and tighten
to Strainer bowl (D-2) using Channel
lock wrench (T-9). Wipe extra
Plumber's putty away from sink side
of the Strainer bowl (D-2) with a
clean rag.
11
A-1
A-2
A-3
A-4
From underneath the sink, slide
Gasket (A-3) . Thread the
Mounting nut (A-4) onto the
mounting stud under sink.
6
9
D-2
D-3
D-4
D-5
T-9
Open the faucet box and check
all parts.
12
B-12
T-11
T-10
Carefully move sink against wall
at your desired location. If needed,
use a pencil to mark off mounting
height of Bracket (B-4).Position
Bracket(B-4)on wall, marking off
fastening location on wall through
holes on Bracket (B-4). Drill holes in
marked locations with Philips screwd
driver bit (T-7). Insert Anchor (B-11)
completely into each drilled hole.
Fasten Screws(B-12) through these
holes into wall or anchors tightly
with a screwdriver.
A-1
A-2
A-3
A-4
A-5
B-11
B-4
T-7
T-4