- ページ 11
サーバー Acer 930のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Acer 930 32 ページ。 High-performance system board
Acer 930 にも: バイオマニュアル (46 ページ), ユーザーマニュアル (16 ページ)
Follow these steps when installing the heat sink and fan to the Pentium II
processor module:
1.
Remove the thermal tape protector at the back of the heat sink.
2.
Insert the wide clip ends to the wide holes on the processor and the
narrow clip ends to the narrow holes.
Figure 1-4
Inserting the Clip Ends to the Processor Holes
3.
Use a screwdriver to press and lock in the wide end of a clip first.
Then without lifting the screwdriver, point it downward to press and
lock the narrow end of the clip. See Figures 5 and 6 for the illustration
of this step.
System Board
1-11