- ページ 2
ディスクアレイシステム Addonics Technologies SRDAP46RSLのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Addonics Technologies SRDAP46RSL 6 ページ。
ページを印刷するFront
Back
Punch out for USIB connectors
Punch out for USIB connectors
Power Supply
Punch out for eSATA
Power Switch: This is the switch to power on devices connected to the power
supply. The power LED will light up to indicate power is supplied.
Note: The main power switch located at the back of the enclosure must be turned
on first.
Reset Button: Not operational.
Buzzer Reset: Pressing the button stops the buzzer from making a sound. The
buzzer will make a sound when temperature inside the storage rack exceeds the
temperature setting on the Thermal Management card.
Power LED: Lights up when the power switch is turned on.
Temp LED: Lights up when temperature setting inside the storage rack exceeds
the setting on the thermal card.
Fan LED: Normally on when fan is operational. If an abnormal condition is
detected, the LED flashes.
HDD LED: Not operational.
1
www.addonics.com
I
Power Switch
O
POWER
System Reset
RESET
Buzzer Reset
Buzzer
Fans
POWER
TEMP
LED Display
FAN
HDD
Punch out for port multipliers/bridges
Technical Support (M-F 8:30am - 6:00pm PST)
Power Supply
ATX Power Supply
This power supply provides 430W of
power. Before turning on the main
switch located on the front panel of
the storage rack, turn on the power
switch of the power supply.
Redundant Power Supply
This power supply includes two
modules within it, each of which is
capable of powering the entire
system by itself. If for some reason
there is a failure in one of the
modules, the other one will
seamlessly take over to prevent the
loss of power to the PC. You can
replace the damaged unit without
powering the machine down. This is
called hot swapping.
Power LED for Power Supply:
Green Light: When the main power switch located on the front of the storage rack is
turned on, the power LED will light up.
Red Light: When one of the module power switch is off or the module failed, the
LED emits a red light and the buzzer will sound.
Module Power Switch: Each module has its own switch.
Module Power LED: By default, it emits a green light when the module power
switch is on. If the module power switch is turned off, the power LED for the power
supply emits a red light.
Buzzer Reset Button: If one of the power modules fail or if the module power
switch is turned off, the buzzer will sound. To reset the buzzer, click on the buzzer
reset button.
Replacing a failed power module:
1.
Loosen the screw that secures the module to the power unit.
2.
Firmly hold the handle of the module and pull it away from the power supply.
Phone: 408-453-6212
Power Switch
Fan
Power
Module
Switch
Power
LED
Handle
Buzzer
Reset
Power LED for
Button
Power Supply
Email: www.addonics.com/support/query/
Fans
10