- ページ 6
計測機器 Apogee MQ-650のPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Apogee MQ-650 20 ページ。 Underwater epar meter
ページを印刷するSPECIFICATIONS
Calibration Uncertainty
Measurement Range
Measurement
Repeatability
Long-term Drift
(Non-stability)
Non-linearity
Response Time
Field of View
Spectral Range
Directional (Cosine)
Response
Azimuth Error
Tilt Error
Temperature Response
Uncertainty in Daily Total
Detector
Housing
IP Rating
Operating Environment
Meter Dimension
Sensor Dimensions
Mass
Cable
Calibration Traceability
Apogee MQ series ePAR meters are calibrated through side-by-side comparison to the mean of four transfer
standard sensors under a reference lamp. The reference sensors are recalibrated with a 200 W quartz halogen
lamp traceable to the National Institute of Standards and Technology (NIST).
400 to 750 nm ± 5 nm (wavelengths where response is greater than 50 %)
± 5 % at 75° zenith angle (see Cosine Response below)
-0.11 ± 0.04 % per C (see Temperature Response below)
Anodized aluminum body with acrylic diffuser
0 to 50 C; less than 90 % non-condensing relative humidity up to 30 C; less than 70 % non-
condensing relativity humidity from 30 to 50 C; separate sensors can be submerged in water up
126 mm length; 70 mm width; 24 mm height
2 m of two conductor, shielded, twisted-pair wire; additional cable available; TPR jacket
MQ-650
± 5 % (see calibration Traceability below)
0 to 4000 µmol m
Less than 0.5 %
Less than 2 % per year
Less than 1 % (up to 4000 µmol m
Less than 1 ms
180°
Less than 0.5 %
Less than 0.5 %
Less than 5 %
Blue-enhanced silicon photodidode
IP68
to depth of 30 m
30.5 mm diameter; 37 mm height
100 g (with 5 m of lead wire)
-2
-1
s
-2
s
-1
)