- ページ 14
おもちゃ Apogee Black Brant VCのPDF マニュアルをオンラインで閲覧またはダウンロードできます。Apogee Black Brant VC 16 ページ。
59. To preserve the definition of the details which
are present on the rocket, apply primer in thin
coats and sand until the rocket is smooth and cov-
ered with a thin, uniform coat of primer. This can
take multiple coats to achieve.
60. Apply the primary paint to the rocket. To do so,
mask the part of the rocket for the required color
on that section, apply the paint, and allow the paint
to dry. Once the paint is dry enough to be han-
dled without being marked by touching, the mask
can be removed. Ensure that the paint has dried
completely between coats however, to prevent
damage to the surface of the paint from mask-
ing. Darker and more opaque colors can often be
layered on lighter colors to reduce the need for
masking. Included here is a schematic for a rather
general Black Brant VC paint scheme which may
not represent a specific prototype.
61. Using a fine-point paint brush, apply any paint
details that cannot be easily masked and painted
in bulk. The scale rail guides (which are silver) are
a good example of where this is useful. Allow the
paint to dry to completely before continuing.
62. Optional: Apply a gloss clear coat to the entire
model to prevent silvering of the decals applied
in the next step (the appearance of a gray rather
than clear background to the decals). First apply
a couple of mist coats which are allowed to dry for
5-10 minutes each, then apply a final heavier coat
that fully wets the surface of the model. Allow the
clear coat to dry entirely before continuing.
Page 14
Step 59
Step 60
Silver
Black
Light Gray
Dark Gray
Silver strip on edge of step
Step 61
Step 62
Dark Green
Gold