- ページ 13

コントロールユニット 4D systems gen4-uLCD-24PTのPDF スタートマニュアルをオンラインで閲覧またはダウンロードできます。4D systems gen4-uLCD-24PT 20 ページ。 Intelligent display modules

Build and Compile the Project

To Build/Upload the project, click the (Build) Copy/Load icon.

Copy the Required Files to the microSD Card

Graphics data for the widgets will actually be stored to a microSD card, which

will be accessed by the graphics processor of the display module during

runtime. The graphics processor will then render the widgets on the display.

At this point, WS4 generates the required graphics files and will prompt you

for the drive to which the microSD card is mounted. Make sure that the

microSD card is properly mounted to the PC, then select the correct drive in

the Copy Confirmation window, as shown in the image below.

Click OK after the files are transferred to the microSD card. Unmount the

microSD Card from the PC and insert it to the display module's microSD Card slot.

gen4-uLCD-XXPT - GETTING STARTED MANUAL