ページを印刷するHeadband adjustment
Adjust the headband to a comfortable fit by
sliding the headband up or down.
There are two different types of ear cushions
supplied with the product, leatherette and foam.
Turning the headset on and off
Turn on the headset
Press and hold the answer button for 2 seconds. Release the button when the LED
flashes green and a short beep is heard in the speaker.
Turn off the headset
Press and hold the answer button for 4 seconds. Release the button when the LED
flashes red 3 times.
Pairing
Prior to using the headset, it must be paired and connected to another Bluetooth
device, such as a mobile phone. For specific instructions, check the users guide of
your phone.
General procedure
l
Turn on Bluetooth on your phone
l
Put the headset in pairing mode (make sure the headset is switched off, press
and hold the answer button for 4-5 seconds until the LED flashes red and green)
l
Perform a search for Bluetooth devices on your phone.
l
Connect to >>device logo<< when found. The PIN code is 0000 (four zeros)
Different phones have different ways to handle Bluetooth devices. Read the users
manual of your phone for more info. Some phone for more info. Some phones will
connect to the headset automatically when it is within range, for example when you
return to your office. For other phones, it may be necessary to reconnect manually
when the connection has been broken.
The pairing mode is active for 3 minutes. After that, the headset will enter standby
mode.