- ページ 7

デジタルカメラ Abus IPCV10010のPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Abus IPCV10010 12 ページ。
Abus IPCV10010 にも：ユーザーマニュアル (12 ページ)

How to install the ABUS IP Camera Viewer

 Connect the ABUS IP Camera Viewer with an HDMI cable to the monitor that

you want to use, to display the camera image.

 When operating via network cable, connect the cable now with the ABUS IP

Camera Viewer. If operating via WiFi, proceed directly with the next step.

 Connect the ABUS IP Camera Viewer to a USB power supply to turn on the

device and provide power.

 Select the appropriate HDMI input tob e displayed on the monitor.

 After the ABUS IP Camera Viewer has booted up, you will see the following

startup screen:

Please note that the ABUS Viewer must be connected to a network

that has access to the Internet for initial startup. This also applies to

commissioning after resetting the configuration settings to factory

default.

Example: Start display of the ABUS IP Camera Viewer on the monitor

Explanation of the IP addresses:

http://192.168.0.100

http://192.168.4.1

ABUS Viewer Address from the local connected network

via network cable.

ABUS Viewer address of its own WiFi hotspot

"ABUSVIEWER" (only for configuration access)