ページを印刷するInstallation IOU
POWER
Before installing IOU, ensure your Eurorack system is powered off. IOU is supplied with a 10-
pin to 16-pin power cable. Carefully align the 10-pin end with the 1x5 pin header on the
module's rear, centering it to prevent any overhang that could cause issues when installing
it into the case. The red stripe on the cable indicates -12V and must align with the !RED!
marking on IOU for proper polarity.
Next, find a 2 HP slot in your Eurorack case for IOU. Connect the other end of the power
cable to your Eurorack power supply, again ensuring the red stripe aligns with the -12V rail.
With the power connection established, mount the module into your case using appropriate
screws and power on your Eurorack system.
The module has reverse protection diodes, which will divert the reverse current to ground in
case of incorrect installation.
5