ページを印刷する
POWER SWITCH
• There are two On/Off power switch on the appliance. (Fig.11 & Fig.12)
• Push on the "I" side to turn the vacuum ON.
• Push on the "O" side to turn the vacuum OFF.
USING THE APPLIANCE AS AN UPRIGHT VACUUM
• Insert the extension tube into the hand vac.
• Choose the appropriate accessory (crevice tool or floor brush) and use it as suction opening on the
hand vac.
• Press the "I" position on the On/Off power switch turn the unit on.
When finished using the unit, press the "O" position on the On/Off power switch to turn the unit off.
• When finished using the unit, wind the power cord around the cord winding hooks for easy storage.
USING THE APPLIANCE AS A HANDHELD VACUUM
• Disassemble the extension tube from the hand vac by releasing the handle port from the locking clip
and removing the extension tube from the hand vac handle.
• Note: You may choose to leave the crevice tool or floor brush attached to the hand vacuum when
operating as such.
Press the "I" position on the On/Off power switch to turn the unit on. When finished using the unit,
press the "O" position on the On/Off power switch to turn the unit off.
11
06
12