- ページ 12

モニター Dasung Paperlike ProのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dasung Paperlike Pro 13 ページ。 Ambient light reflective e ink monitor

ページを印刷する

■Exit

For Windows, click "Exit" to exit the software. If you click "X", the software will automatically

shrink to the tray and continue to run.

For Mac, click "Exit" to exit the software.

Recommendation

■In 1600*1200 resolution, if you feel the words are too small, you can change the zoom

of system(DPI) to 125%-175%. In duplicated mode, the DPI will affect both the LCD and

Paperlike Pro.

■As Paperlike Pro is 4:3 (not 16:9 as usual), in some resolutions, there may be black stick

at the edge of the screen.

■Paperlike Pro is the fastest Eink product which response nearly as quickly as the LCD.

However, the refresh rate is still lower than the LCD. You may feel the cursor is not fast

enough. We recommend you change the cursor's size and the moving speed.

■Use together with the LCD. Use more keyboard rather than mouse. (such as "PgUp/

PgDn")

■Plug in the USB before HDMI.

■Plug out the cable before the PC is power off/ restart.

Paperlike Pro

Usage flow and fault diagnosis

【Indicated light】

Paperlike Pro's indicated light has 3 states:

【Light off】 There is no power. Please connect/re-connect the USB to the power.

【Blue/White】Paperlike Pro is booting.

【Green】Paperlike Pro is ready.

If Paperlike Pro has no response, please exit the software, disconnect all the cable. And do

the following steps:

Power Off

Exit the software. Disconnect all the cable.

Only connect the USB to the power. The light will turn from white to blue,

then the screen will refresh black/white and stay white. The light will stay

green.

Turn-on

Power-1

Problem: 1, The light stayed white/blue. 2, The screen did not change.

Solve: The power is not stable. Please re-connect the USB or press

button "C" + "M".

Connect the HDMI to the PC. PC's screen may be black for a second.

Than you can see the image on Paperlike Pro.

Problem: There is no image on the Paperlike Pro, and no more monitors

can be seen in OS' Display Setting.

Turn-on

Solve: HDMI is not stable, reconnect it; click "Detect" in OS' Display

Power-2

Setting

Problem: The image on the Paperlike Pro looks strange.

Slove: Press "C" button; Change the contrast in software; Reconnect the

HDMI cable

It displays well.

Problem: The image did not move.

Working Stage

Solve: Move the mouse or press "C" button to exit the screen saver;

Restart the Paperlike Pro software; "C"+"M" to restart the Paperlike Pro

If the diagnosis above does not help, please do not hesitate to contact us at [email protected]

Paperlike Pro