- ページ 2

エンクロージャー Dat Optic Speedzter IIのPDF ユーザーマニュアルをオンラインで閲覧またはダウンロードできます。Dat Optic Speedzter II 9 ページ。 2.5” hdd enclosure

Introduction

Thank you for purchasing the 2.5" HDD Enclosure Kit.

Your 2.5" HDD enclosure enables blazing fast data transfer speed and instant addition

of external storage capacity. Simply complete the installation process to begin using

your enclosure.

Please thoroughly read and follow the instructions provided in this

manual. Failure to do so may result in damage to the enclosure and

any or all of the connected devices.

The main circuit board of the HDD enclosure is susceptible to static electricity.

Proper grounding is required to prevent electrical damage to the enclosure or

other connected devices, including the computer host. Always place the HDD

enclosure on a smooth, flat surface and avoid all dramatic movement,

vibration and percussion.

Do NOT allow water to enter the HDD enclosure.

Avoid placing the HDD enclosure close to magnetic devices (such as a mobile

phone), high-voltage devices (such as a hair dryer), or near a heat source

(such as on the dashboard of a car or any place where the enclosure will be

subject to direct sunlight).

The operating system may NOT detect the HDD enclosure if it does not

support the interface of your HDD enclosure. If so, installation of an

appropriate driver on the host computer is required.

Ensure that only a 9.5mm high 2.5" HDD is used in the enclosure. The

Enclosure will not function if an older model HDD with a different thickness is

used. Additionally the enclosure and other equipment may be damaged.