計測機器 APPA A17のPDF インストラクションカードをオンラインで閲覧またはダウンロードできます。APPA A17 3 ページ。 Leakage current clamp meter
ページを印刷する
A17
Instruction
Card
Leakage Current
Clamp Meter
Warning
Safety
. . . . . . . . . .
. . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . . .
Read First
Safety Information
To ensure safe operation and service of
the Tester, follow these instructions.
Failure to observe warnings can result in
severe injury or death.
- Avoid working alone so assistance can
be rendered.
- Do not use test leads or the Tester if
they look damaged.
- Do not use the Tester if the Tester is
not operating properly or if it is wet.
- Use the Tester only as specified in the
Instruction card or the protection by
the Tester might be impaired.
- Use extreme caution when working
around bare conductors or bus bar.
Contact with the conductor could result
in electric shock.
Symbols as marked on the Tester
and Instruction card
Risk of electric shock
See instruction card
DC measurement
Equipment protected by double or
reinforced insulation
Low battery
Earth
AC measurement
Conforms to EU directives
Application around and removal
from hazardous live conductors is
permitted
Do not discard this product or
throw away
Caution
Take sufficient care to not to apply shock,
vibration or excessive force to the jaw tips.
Power On / Off
•
The Meter displays Battery Capacity
when powering up. Please replace the
battery when 0% is shown.
Auto Power Off Enable /
Disable
Auto Hold Enable / Disable
Auto Backlight
Caution
If the meter is used in the vicinity of equip-
ment which generates electromagnetic
interference, the display may become
unstable or the measurements show may
be subject to large errors.
ACA
Leakage Current Measurement