- ページ 3

照明器具 Durite 0-441-72のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Durite 0-441-72 4 ページ。 Led high intensity warning light

WIRE SPECIFICATION

FLASH PATTERNS

19 Flash Patterns Total:

Grouping for Simultaneuos Flash:

Connecting all units with black, red and yellow wires will synchronize all lightheads.

Touching red wires to the yellow wires for 5 seconds will change the flash pattern (all units

must be reset individually on the first same pattern to remain synced together on the same

pattern). If you want to change the flash pattern synchronize, touching red wires to the yel-

low wires for 1 second will change the flash pattern. Note: If the light could not be synced

please repeat STEP 1.

Grouping for Alternating Flash:

Connecting all units with black, red and yellow wires will synchronize all lightheads.

Touching red wires to the yellow wires for 5 seconds will change the flash pattern (all heads

must be reset individually on the same pattern first to remain synced together on the same

patterns). Connecting one unit or some units green wires to the red wire will make them

alternating flash.Do not connect Yellow to the red wires, all units remain synced together on

the same patterns. If the units could not achieve alternating flash, please repeat STEP 1.

0-441-72-LEAF