- ページ 16

データロガー Data Harvest EasySense Q 5のPDF マニュアルをオンラインで閲覧またはダウンロードできます。Data Harvest EasySense Q 5 20 ページ。

and time) each time it is connected to the computer and one of the Sensing Science pro-

grams is run.

Note: If the date or time on a data set is not correct, check the date/time settings on your

computer.

EasySense Q's memory

EasySense Q's memory space is divided into 4 'data slots' and so can store four

investigations that have been collected in standalone mode (when not connected to the

computer). Each slot is filled in turn. Once the 4

overwrite existing data starting at memory slot 1 (the earliest data set).

The experiments are identified by date; time & logging type i.e. Easy Log, Snapshot

Meter, Timer or Remote and duration.

4 x 20 Character LCD Display.

USB compatible communication V1.1.

Memory Capacity: 4 x data sets.

Rate: 50 samples per second max logging speed.

Digital timing from A to B accurate to 2 decimal places.

10 bit sampling resolution.

Note: Smart Q Sensors are capable of 12 bit resolution. Specifications stated for Smart Q

Sensors are applicable to when used with a 12 bit data logger or interface e.g. EasySense

Advanced. EasySense Q is a 10 bit data logger so may not be able to fully utilise this capability

and the resolution stated for each Sensor may not be as high.

Care & Maintenance

Clean with a damp cloth, do not immerse in water or detergent.

EasySense Q is suitable for use in an operating range of 0 - 40°C and 0 to 95%RH

(non-condensing).

Do not subject to extreme heat or cold or leave in a location where it will get wet.

EasySense Q is not waterproof.

Apart from the battery pack there are no user serviceable parts inside EasySense Q.

Before reporting a fault please attempt a HARD RESET of the unit.

1. Connect to the mains power supply.

2. Hold down the three buttons (green triangle, red square and

yellow arrow) for a second then release.

If the hard reset has been done correctly, the LCD will momentarily display EasySense Q

before returning to the main menu.

If you are experiencing a problem, please contact the Technical Support department at

Data Harvest. Please provide details of:

The computer platform it is being used with.

slot is used EasySense Q will begin to