- ページ 16

ミシン DURKOPP ADLER DAC classic 867のPDF 補足説明をオンラインで閲覧またはダウンロードできます。DURKOPP ADLER DAC classic 867 20 ページ。 Flatbed machines throat plate slide interrogator
DURKOPP ADLER DAC classic 867 にも：取扱説明書 (19 ページ)

ページを印刷する

Fig. 15: Connecting the throat plate slide interrogator (5)

(11) - Plug connection X2-X5

(12) - Plug connection X6 (IN)

8. Connect the cable of the throat plate slide interrogator at any available

9. Connect the corresponding slot on the machine distributor (depending

10. When the circuit board (8) is connected to the machine, connect plug

11. Set all DIP switches (13) whose slots X1-X5 are NOT occupied to

Information

The ON position of the DIP switches signifies that no interrogator is

connected at the corresponding slot or that the function of the respective

interrogator is switched off.

 The DIP switches (13) shown in the figure below MUST be set to the

 The needle cover interrogator has been successfully assembled and

Proceed by testing the functionality of the throat plate slide interrogator

( p. 15).

⑪

slot X2/X3/X4/X5 (11).

on the machine) to plug connection X6 (12).

connection X13 (9) with plug connection X1 (14).

position ON.

following position:

• DIP switch 1: ON

• DIP switch 2: OFF

• DIP switch 3: OFF

• DIP switch 4: ON

• DIP switch 5: ON

connected.

Connecting the throat plate slide interrogator

(13) - DIP switch 1-5

(14) - Plug connection X1

Additional Instructions 867 M-TYPE - 00.0 - 05/2018

⑭

⑬

⑫