- ページ 4

ペイントスプレー Duro Dyne SSFUのPDF オーナーズマニュアルをオンラインで閲覧またはダウンロードできます。Duro Dyne SSFU 8 ページ。 Adhesive applicator

ASSEMBLY

Assembling for the 5 Gallon unit: (see Figure-1 below)

1 - Insert the Suction Tube through the hole into the Elbow to its full depth.

2 - Insert the Re-circulation Tube (shown as hidden) through the hole into the Connector to its full depth.

Tube may be as shown or on other side of the Elbow. Tighten the nut securely.

3 - Place the assembled unit over a 5 gallon pail and use as required.

Hose Connections: (see Figure-1 below)

1 - Read the entire Spray Gun manual before connecting the Hoses and operating the sprayer.

2 -Connect the Black and Red Hoses between the Pump and the Spray Gun as shown.

Assembling for the 55 Gallon unit: (see Figure-1 below)

1 - Pre-assemble the Long and Short Suction Tubes as shown in DETAIL-A using the Coupling supplied.

2 - Insert the assembled Suction Tube through the hole into the Elbow to its full depth.

3 - Insert the Re-circulation Tube (shown as hidden) through the hole into the Connector to its full depth.

Tighten the nut securely.

4 - Place the assembled unit on a 55 gallon drum with the tubes inserted through the hole of the lid and use

as required.

Spray Gun

Elbow

Long Suction Tube

Coupling

Short Suction Tube

DETAIL-A

Figure 1:

Black Hose

Red Hose

Re-Circulation Tube

Short Suction Tube

Pump

Connector

Elbow

Lid