- ページ 15

電動工具 DUROFIX RZ4012のPDF 情報マニュアルをオンラインで閲覧またはダウンロードできます。DUROFIX RZ4012 17 ページ。 Oil pulse tool

WARNING

NOTE

This tool is lubricated before it leaves the factory. This lubrication

should last for the life of the tool. No further lubrication is required.

DANGER

adjustment require exclusive JIGS plus testers, and trained techniques. Incorrect

disassembly, reassembly or adjustment can cause not only insufficient power but also

accidents. Ask for these services from an authorized service centre. The maker or

supplier will not be held liable for any damages caused by factors found to be the

cause of faulty use or repair by users or unauthorized service provider.

CLEANING

With the motor running, blow dirt and dust out of all air vents with dry air at least once

a week. Wear safety glasses when performing this. Exterior plastic parts may be

cleaned a damp cloth and mild detergent. Although these parts are highly solvent

resistant, NEVER use solvent.

STORE

Store the tool in a place that remains between 0℃-40℃, is moisture free, dust free and

free from direct rays of the sun.

PERIODIC INSPECTION

It is recommend to allow a trained service centre to disassemble, adjust the tool and

replace the hydraulic oil every 200,000 cycles (green lamp automatically blink 3

seconds to remind user) or six months whichever comes earlier.

Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool may become hazardous when used on

another tool.

Recommended accessories for use with your tool are available at extra cost from your

local service centre.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance

and adjustments should be performed by certified service centres or other qualified

service organizations, always using identical replacement parts.

MAINTENANCE

Remove the battery pack from this tool before cleaning solutions.

A battery pulse tool is a precision tool. Disassembly, assembly,

ACCESSORIES