- ページ 3

無線モデム Data-Linc Group FLC910EのPDF クイックスタートをオンラインで閲覧またはダウンロードできます。Data-Linc Group FLC910E 4 ページ。 Fastlinc 905-925 mhz ofdm industrial ethernet radio modem

ページを印刷する

Configuring the "Base Station"

•Select [Radio] to configure the RF transceiver operation:

•Select "Base Station" as Operating Mode

•Click the [Apply] button at the bottom to save.

•Click the [Edit] button to setup the VBS/VLAN settings.

•Select Security Profile #1 BS_Profile1 and click the [Edit] button.

•Change "Wireless Network Name (SSID)" to the connection SSID to use for the network.

•Change the "Network Authentication: " to "WPA2-PSK" for highest security.

•Set the "WPA Passphrase (Network Key):" The Passphrase of WPA2-PSK must be a value with a length

between 8 to 63 characters. The use of alpha numeric (mix of letters, numbers, and symbols) is

recommended.

•Click the [Apply] button at the bottom to save.

•Select [Basic Setup] to configure the IP Address settings

Change the Device Name (if desired for a more recognizable name).

Change the "IP Address"

Note: All the units and equipment on the network will need unique IP addresses or use a DHCP server to

assign an address). Note: When the settings are applied the IP Address will be changed. To continue configura-

tion changing the PC IP Address may be needed.

•Click the [Apply] button at the bottom to save.

This unit is now configured as the system "Base Station".

PN 161-09855-001A

June 2010

FLC910E Quick Start Guide